Tandberg Series 3000X

Closed
100$US
For_service_or_parts

Seller Information

Cori Calabi
No Feedback
(0)
Millbrae, United States

Has not been used in decades, so will need new parts (belts, pads, etc). Cosmetically, there is a small dent on the bottom right side of the metal front piece (see last photo), otherwise no dings or scratches. Cord is in good condition. Manual is included. Located in SF Bay Area, shipping not included in price.

Technical Details

Tandberg
Series 3000X
Mid High Fidelity
Consumer
Solid State
Norway
1/4 Rec/PB
1 7/8, 3 3/4, 7 1/2
7"
4
Permalloy
Stereo
IEC
1
110-120v, 220-240v
6 / 10
7 / 10
View Full Info Detail

Additional Details

Description

The series 3000X was first released in 1970 and sold until 1973. It was available in either half
or quarter-track versions and had four heads (erase, record, play and cross-field bias), a single motor and three playing speeds.
No internal amplifier or speakers were provided, making this a deck-only recorder.
Horizontal or vertical operation was possible and features included AB test switch, Sound-on-sound, single-lever operation for tape transport, audible cuing, 4-digit tape counter and specifications better than DIN 45,500

Additional Info

Speed tolerance: 1.5% / Crosstalk: mono: 60 dB, stereo: 50 dB at 1000 Hz / Harmonic distortion: 0.5% (record amp) 0.3% playback at 0.75 V output / Erase ratio: 85.5 kHz, distortion less than 0.5% / Rewind speed: 1200 ft reel – 90 seconds. 1800ft reel – 150 seconds / Inputs: microphone: 200-700 ohms, sensitivity at 400 Hz: 0.1 mV, max 25 mV line: 1 M, sends at 400 Hz: 100 mV, max 20 V line: (radio): 57 K, sends at 400 Hz: 5 mV, max 1 V / Outputs: line: minimum load 100 ohms, level 0.75 V (400 Hz recorded at ‘0’ vu) headphones: stereo jack / Dimensions: 15½ x 6½ x 12½ ” (394 x 165 x 316mm) / Weight: 20 lbs (9.1 kg) / quarter-track or half-track stereo versions available